Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM

NAVIGATION SYSTEM > Panel Switches do not Function

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK PANEL SWITCH
  1. Check for foreign matter around the switches that might prevent operation.

    OK:
    No foreign matter is found.



NG
REMOVE ANY FOREIGN MATTER FOUND
OK


2.CHECK PANEL SWITCH (OPERATION CHECK)
E176522
  1. Enter the "Panel&Steering Switch Check Mode" (Check Panel & Steering Switch) (Click here).

  1. Operate the abnormal switch and check if the switch name and status are correctly displayed.

    OK:
    The switch name and status are correctly displayed as operated.



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)