NAVIGATION SYSTEM > Voice is not Recognized |
| 1.CHECK NAVIGATION SETTING |
![]() |
Display the "Voice Settings" screen.
Check that "Voice Recognition Guidance" is not "Off".
|
| ||||
| OK | |
| 2.CHECK HARD DISK DRIVE (OPERATION CHECK) |
![]() |
Display the "Failure Diagnosis" screen (Click here).
Select "HDD Check" and check the result.
| *1 | Result |
|
| ||||
| OK | |
| 3.CHECK CABIN |
Check that condensation is not likely to occur in the cabin, and that the temperature is not high or extremely low in the cabin.
|
| ||||
| OK | |
| 4.CHECK MICROPHONE (OPERATION CHECK) |
![]() |
Display the "Microphone&Voice Recognition Check" screen (Click here).
When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.
Push the recording switch and perform voice recording.
Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.
| *1 | Microphone Input Level Meter |
| *2 | Recording Switch |
| *3 | Stop Switch |
| *4 | Play Switch |
| *5 | Recording Indicator |
|
| ||||
| OK | ||
| ||