Home › BRAKE › BRAKE › REAR BRAKE FLEXIBLE HOSE

REAR BRAKE FLEXIBLE HOSE > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedures for the LH side and RH side.
  2. The procedures listed below are for the LH side.



1. REMOVE REAR WHEEL


2. DRAIN BRAKE FLUID


3. REMOVE REAR BRAKE FLEXIBLE HOSE


    C132824
  1. Remove the union bolt, the rear brake flexible hose and gasket.



    C132791E02
  1. Remove the bolt and separate the rear brake flexible hose.



    C133343E02
  1. Using SST, disconnect the brake line while holding the rear brake flexible hose with a wrench.

    SST
    09023-00101  

    NOTICE:
    1. Do not bend or damage the brake line.
    2. Do not allow any foreign matter such as dirt and dust to enter the brake line from the connecting points.

  1. Remove the clip.