Light Control:
Display
| Default
| Contents
| Setting
|
Response Time
| 0.15 s
| Changes the delay timing of lighting the taillight when going into a tunnel in case the light control switch is in the AUTO position.
| 1 s / 0.15 s
|
Sensitivity
| NORMAL
| Adjusts the sensitivity of the automatic light control system. *1
| LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
|
Disp Ex ON Sen
| NORMAL
| Changes the ambient brightness level required to dim the clock display illumination, etc.*1
| LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
|
Disp Ex OFF Sen
| NORMAL
| Changes the ambient brightness level required to cancel the dimming of the clock display illumination, etc.
| LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
|