SEAT POSITION SENSOR > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for Manual Seat) |
| 3. REMOVE FRONT SEAT HEADREST ASSEMBLY (for Manual Seat) |
| 4. REMOVE FRONT SEAT HEADREST ASSEMBLY (for Power Seat) |
| 5. REMOVE SEAT TRACK COVER LH (for Manual Seat) |
Move the front seat assembly fully forward by operating the slide handle.
![]() |
Using a screwdriver, disengage the 4 claws and remove the seat track cover.
| 6. REMOVE SEAT TRACK COVER LH (for Power Seat) |
Operate the power seat switch knob and move the seat to the position farthest forward.
![]() |
Using a screwdriver, detach the 4 claws and remove the seat track cover.
| 7. REMOVE INNER SEAT TRACK BRACKET COVER LH (for Manual Seat) |
![]() |
Using a screwdriver, disengage the 4 claws and remove the inner seat track bracket cover.
| 8. REMOVE INNER SEAT TRACK BRACKET COVER LH (for Power Seat) |
![]() |
Using a screwdriver, detach the 4 claws and remove the inner seat track bracket cover.
| 9. REMOVE FRONT SEAT ASSEMBLY LH (for Manual Seat) |
Move the front seat assembly to the rearmost position by operating the slide handle.
![]() |
Remove the 2 bolts on the front seat track bracket.
Move the front seat assembly fully forward by operating the slide handle.
![]() |
Remove the 2 bolts on the rear seat track bracket.
Move the front seat assembly to the center position and adjust the seatback to the vertical position by operating the slide and reclining adjuster release handle.
Disconnect the connectors and clamp.
Remove the front seat assembly.
| 10. REMOVE FRONT SEAT ASSEMBLY LH (for Power Seat) |
Operate the power seat switch knob and move the seat to the rearmost position.
![]() |
Remove the 2 bolts on the front seat track bracket.
Operate the power seat switch knob and move the seat to the position farthest forward.
![]() |
Remove the 2 bolts on the rear seat track bracket.
Disconnect the cable from the negative (-) battery terminal.
Disconnect the connectors under the seat. Then remove the front seat assembly.
| 11. REMOVE VERTICAL ADJUSTER COVER (for Manual Seat) |
![]() |
Using a screwdriver, disengage the 2 claws and remove the vertical adjuster cover LH.
| 12. REMOVE NO. 2 VERTICAL ADJUSTING HANDLE (for Manual Seat) |
![]() |
Remove the 2 screws and vertical adjusting handle.
| 13. REMOVE RECLINING ADJUSTER RELEASE HANDLE (for Manual Seat) |
![]() |
Lift the reclining adjuster release handle.
Using a screwdriver, disengage the claw and remove the reclining adjuster release handle.
| 14. REMOVE FRONT SEAT CUSHION SHIELD (for Manual Seat) |
![]() |
Disengage the 2 hooks.
![]() |
Remove the 3 screws.
Disengage the 2 claws and remove the front seat cushion shield.
| 15. REMOVE SEAT POSITION SENSOR (for Manual Seat) |
![]() |
Disconnect the connector.
Using a "TORX" socket (T30), remove the "TORX" screw and seat position sensor with the seat slide position sensor protector.
![]() |
Remove the seat position sensor from the seat slide position sensor protector as shown in the illustration.
| 16. REMOVE SEAT POSITION SENSOR (for Power Seat) |
![]() |
Disconnect the connector.
Using a "TORX" socket (T30), remove the "TORX" screw and seat position sensor with the seat slide position sensor protector.
![]() |
Remove the seat position sensor from the seat slide position sensor protector as shown in the illustration.