FRONT AIRBAG SENSOR > INSTALLATION |
| 1. INSTALL FRONT AIRBAG SENSOR |
Check that the ignition switch is off.
Check that the battery negative (-) cable is disconnected.
![]() |
Install the front airbag sensor with the bolt.
Check that there is no looseness in the installation parts of the front airbag sensor.
Connect the connector.
| 2. INSTALL ENGINE UNDER COVER LH |
| 3. INSTALL ENGINE UNDER COVER RH |
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 5. INSPECT SRS WARNING LIGHT |
Inspect the SRS warning light (Click here).