Home › INTRODUCTION › INTRODUCTION › REPAIR INSTRUCTION

REPAIR INSTRUCTION > CUSTOMIZE PARAMETERS



AIR CONDITIONING SYSTEM

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.


Air Conditioner: 
DISPLAY (ITEM)
DEFAULT
CONTENTS
SETTING
Shift Set Temperature
(Set Temp Shift)
NORMAL
To shift the temperature against the displayed temperature
+2 C / +1 C / NORMAL / -1 C / -2 C
Air Inlet Mode
(Air Inlet Mode)
AUTO
In case of turning the A/C ON when you desire to make the compartment cool down quickly, this is the function to change the mode automatically to RECIRCULATION mode
MANUAL / AUTO
Compressor Mode
(Compressor Mode)
AUTO
Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF
MANUAL / AUTO
Compressor / DEF Mode
(Comprs / DEF Oper)
LINK
Function to turn the A/C ON automatically linked with the FRONT DEF button when the A/C is OFF
NORMAL / LINK
Evaporator Control
(Evap Ctrl)
AUTO
Function to set the evaporator control to the AUTOMATIC position (AUTO) to save power, or to the coldest position (MANUAL) to dehumidify the air and to prevent the windows from fogging up
MANUAL / AUTO
Foot / DEF Auto Mode
(Foot / DEF Mode)
ON
Function to turn the airflow from FOOT / DEF ON automatically when AUTO MODE is ON
OFF / ON
Foot / DEF Auto Blow Up
(Auto Blow Up)
ON
Function to change the blower level automatically when the defroster is ON
OFF / ON
Ambient Temperature Shift
(Ambient Tmp Sft)
NORMAL
Function to shift the ambient temperature against the displayed ambient temperature
+3 C / +2 C / +1 C / NORMAL / -1 C / -2 C / -3 C

LIGHTING SYSTEM

HINT:
The following items can be customized.

NOTICE:
  1. Before attempting to customize vehicle settings, confirm whether it is possible to make the change that the customer has requested.
  2. Be sure to record the current value before customizing.
  3. In case of performing the troubleshooting, pay attention because there is a possibility that the function has been disabled by customizing. (Example: In case of the symptom in which "The wireless operation does not function", check that the wireless operation has not been disabled by customizing, then perform the troubleshooting.)


Illuminated Entry: 
Display
Default
Contents
Setting
Lighting Time
15 s
Changes the lighting time of the interior light and ignition key cylinder light after closing all of the doors.
7.5 s / 15 s / 30 s
I/L ON W/Door Key Unlock
ON
Lights up the interior light and ignition key cylinder light when a door is unlocked.
ON / OFF
I/L when ACC OFF
ON
Lights up the interior light and ignition key cylinder light when the ignition switch is turned from ACC to OFF.
ON / OFF

Light Control: 
Display
Default
Contents
Setting
Response Time
0.15 s
Changes the delay timing of lighting the taillight when going into a tunnel in case the light control switch is in the AUTO position.
1 s / 0.15 s
Sensitivity
NORMAL
Adjusts the sensitivity of the automatic light control system. *1
LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
Disp Ex ON Sen
NORMAL
Changes the ambient brightness level required to dim the clock display illumination, etc.*1
LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
Disp Ex OFF Sen
NORMAL
Changes the ambient brightness level required to cancel the dimming of the clock display illumination, etc.
LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2

HINT:
Sensitivity adjustment can hardly be confirmed. Check by driving the customer's vehicle.


Illustration *1 
Ambient Brightness Level

E107164

Setting
DARK2
DARK1
NORMAL
LIGHT1
LIGHT2

POWER DOOR LOCK CONTROL SYSTEM
CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

HINT:
The following items can be customized.

NOTICE:
  1. Before attempting to customize vehicle settings, confirm whether it is possible to make the change that the customer has requested.
  2. Be sure to record the current settings before customizing.
  3. When troubleshooting, make sure that the item in question has not been disabled using the customizing function.


WIRELESS D LOCK 
Display
(Item)
Default
Contents
Setting
Auto Lock Delay
30s
Function that selects AUTO LOCK time 30 sec. or 60 sec.
30s/60s

WIRELESS DOOR LOCK CONTROL SYSTEM

HINT:
The following items can be customized.

NOTICE:
  1. After confirming whether the items requested by the customer are applicable or not for customization, perform customizing operations.
  2. Be sure to record the current settings before customization.
  3. When troubleshooting, make sure that the item in question is not set to "OFF" as a result of customization (Example: For the system, "the wireless function does not operate", first check that the wireless function is not set to "OFF", then perform troubleshooting).


Wireless Door Lock Control System: 
Item (Display)
Default
Contents
Setting
Wireless Control
(Wireless door lock control function)
ON
This function turns the wireless door lock function on or off.
ON / OFF
Hazard Answer Back
(Hazard answer-back for wireless door lock operation)
ON
When LOCK is pressed, all hazard warning lights flash once.
When UNLOCK is pressed, all hazard warning lights flash twice.
ON / OFF
Auto Lock Time
30 s
This function controls the amount of time from unlocking doors to automatic re-locking.
30 s / 60 s
P/W Up W/ Transmit
ON
This function closes the power window by pressing the LOCK switch of transmitter for approx. 2.4 seconds.
ON / OFF
P/W Down W/ Transmit
ON
This function opens the power window by pressing the UNLOCK switch of transmitter for approx. 2.4 seconds.
ON / OFF
Trunk Lid Operation
(Wireless luggage compartment door open function setting)
0.6 s PR
This function changes operation method of transmitter to open luggage compartment door.
1 TIME: Push 1 time (within 3 sec.)
2 TIMES: Push 2 times
0.6 s PR: Push longer than 0.6 seconds
OFF: Does not operate
1 TIME / 2 TIMES / 0.6 s PR / OFF

KEY REMINDER WARNING SYSTEM
PARAMETERS (USING INTELLIGENT TESTER)

HINT:
The following items can be customized.

NOTICE:
  1. Be sure to record current values before customizing.
  2. When performing troubleshooting, be aware that the functions may be set to OFF by customizing. (Example: In case of the symptom in which "The wireless operation does not function", check that the wireless operation is not set to OFF by customizing, then perform the troubleshooting.)


METER: 
Display (Item)
Default
Contents
Setting
Key Remained Volume
Large
Function to change volume of the key reminder warning buzzer.
Large/Medium/Small
Key Remained Sound
900
Function to change cycle of the key reminder warning buzzer.
600/900/1,200 ms.

METER/GAUGE SYSTEM
COMBINATION METER ASSEMBLY

NOTICE:
  1. Be sure to record the current value before customizing.

HINT:
The following items can be customized using intelligent tester.


Combination Meter: 
Display (Item)
Default
Contents
Setting
Key Remind Volume
Large
Function to change the volume of the key remind warning buzzer
Large, Medium, Small
Key Remind Sound
Normal
Function to change the cycle of the key remind warning buzzer
Fast, Normal, Slow
Seat-belt Warning Buzzer
D/P ON
Function to change the setting of the seat belt buzzer.
D/P ON, D ON, P ON, D/P OFF

HINT:
This setting is only valid for the buzzer which sounds at the 5 km/h (3 mph) or more.


POWER WINDOW CONTROL SYSTEM

HINT:
The following items can be customized.

NOTICE:
  1. After confirming whether the items requested by the customer are applicable or not for customization, perform customize operations.
  2. Be sure to record the current settings before customizing.
  3. When troubleshooting, make sure that the item in question is not set to "OFF" as a result of customization. (Example: For the symptom "the wireless function does not operate", first check that the wireless function is not set to "OFF", then perform troubleshooting).


Body:

DISPLAY (ITEM)
DEFAULT CONTENTS
CONTENTS
SETTING
Door Key P/W Up
AVIL
Function that enables all power windows to move up manually, when driver side door key cylinder is held in lock position for 1.5 seconds when ignition switch is off.
NOT/AVIL
Door Key P/W Down
AVIL
Function that enables all power windows to move down manually, when driver side door key cylinder is held in unlock position for 1.5 seconds when ignition switch is off.
NOT/AVIL


SLIDING ROOF SYSTEM

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.


Sliding roof ECU 
Display (Item)
Default
Contents
Setting
OPEN/DOOR KEY
(Door key related OPEN)
ON
Function to manually open sliding roof linked with power window if holding driver's side and passenger's side door key for 1.5 seconds or more to unlock position when ignition switch is off
ON/OFF
CLOSE/DOOR KEY
(Door key related CLOSE)
ON
Function to manually close sliding roof linked with power window if holding driver's side and passenger's side door key for 1.5 seconds or more to lock position when ignition switch is off
ON/OFF
OPEN/WIRELESS
(Wireless key related OPEN)
ON
Function to manually open sliding roof linked with power window if pressing transmitter UNLOCK switch for 2.4 seconds or more when ignition switch is off
ON/OFF
CLOSE/WIRELESS
(Wireless key related CLOSE)
ON
Function to manually open sliding roof linked with power window if pressing transmitter LOCK switch for 2.4 seconds or more when ignition switch is off
ON/OFF
DOOR KEY OPER
(Door key related operation)
SLIDE
Function to select tilt up or slide open of manual sliding roof operation linked with power window
Activated by holding driver's side door key for 1.5 seconds or more to unlock position when ignition switch is off
TILT/SLIDE
WIRELESS OPER
(Wireless key related operation)
SLIDE
Function to select tilt up or slide open of manual sliding roof operation linked with power window
Activated by pressing on transmitter UNLOCK switch for 2.4 seconds or more when ignition switch is off
TILT/SLIDE