Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM

TOYOTA PARKING ASSIST-SENSOR SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the clearance sonar main switch on.

  4. Turn the intelligent tester on.

  5. Enter the following menus: Body / Clearance Sonar / DTC.

  6. Check for DTCs.


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the clearance sonar main switch on.

  4. Turn the intelligent tester on.

  5. Enter the following menus: Body / Clearance Sonar / DTC.

  6. Clear the DTCs by pressing the YES button on the intelligent tester display.