Home › BODY › WINDSHIELD / WINDOWGLASS › POWER WINDOW MASTER SWITCH

POWER WINDOW MASTER SWITCH > INSPECTION

for Preparation Click here



1. INSPECT POWER WINDOW MASTER SWITCH


    B050518E04
  1. Measure the resistance when the switch is operated according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    8 (UP) - 1 (E) - 4 (AUTO)
    Auto UP
    Below 1 Ω
    5 (DN) - 6 (B)
    Below 1 Ω
    8 (UP) - 1 (E)
    Manual UP
    Below 1 Ω
    5 (DN) - 6 (B)
    Below 1 Ω
    8 (UP) - 5 (DN) - 6 (B)
    OFF
    Below 1 Ω
    5 (DN) - 1 (E)
    Manual DOWN
    Below 1 Ω
    8 (UP) - 6 (B)
    Below 1 Ω
    4 (AUTO) - 5 (DN) - 1 (E)
    Auto DOWN
    Below 1 Ω
    8 (UP) - 6 (B)
    Below 1 Ω
    1 (E) - 10 (RRU)
    Lock/Unlock switch
    UNLOCK (Below 1 Ω) → LOCK (10 kΩ or higher)
    1 (E) - 12 (RLU)
    1 (E) - 13 (RLD)
    1 (E) - 15 (PD)
    1 (E) - 16 (PU)
    1 (E) - 18 (RRD)