DEFOGGER RELAY > ON-VEHICLE INSPECTION |
| 1. INSPECT DEFOGGER RELAY (Marking: DEFOG) |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Condition | Specified Condition |
| 3 - 4 | Below 1 Ω (when battery voltage is not applied between terminals) |
| 3 - 5 | 10 kΩ or higher (when battery voltage is not applied between terminals) |
| 3 - 5 | Below 1 Ω (when battery voltage is applied to terminals 1 and 2) |