LUGGAGE COMPARTMENT DOOR > ADJUSTMENT |

| 1. REMOVE LUGGAGE COMPARTMENT DOOR COVER |
![]() |
Using a clip remover, remove the 13 clips and luggage compartment door cover.
| 2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT |
| 3. REMOVE SPARE WHEEL COVER CLAMP |
| 4. REMOVE SPARE WHEEL COVER ASSEMBLY |
| 5. REMOVE LUGGAGE COMPARTMENT SIDE TRAY ASSEMBLY |
![]() |
Remove the bolt.
Disengage the clip and remove the luggage compartment side tray assembly.
| 6. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK |
![]() |
Remove the 2 screws and the 2 No. 1 luggage compartment trim hooks.
| 7. REMOVE REAR FLOOR FINISH PLATE |
![]() |
Disengage the 7 clips and remove the rear floor finish plate.
| 8. ADJUST LUGGAGE COMPARTMENT DOOR |
![]() |
Loosen the door side hinge bolts to adjust the door horizontally and vertically.
![]() |
Adjust the striker position by slightly loosening the striker mounting screws and hitting the striker with a plastic hammer.
Tighten the striker mounting screws after the adjustment.
| 9. INSTALL REAR FLOOR FINISH PLATE |
![]() |
Engage the 7 clips and install the rear floor finish plate.
| 10. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK |
![]() |
Install the 2 No. 1 luggage compartment trim hooks with the 2 screws.
| 11. INSTALL LUGGAGE COMPARTMENT SIDE TRAY ASSEMBLY |
![]() |
Engage the clip and install the luggage compartment side tray assembly.
Install the bolt.
| 12. INSTALL SPARE WHEEL COVER ASSEMBLY |
| 13. INSTALL SPARE WHEEL COVER CLAMP |
| 14. INSTALL LUGGAGE COMPARTMENT FLOOR MAT |
| 15. INSTALL LUGGAGE COMPARTMENT DOOR COVER |
![]() |
Install the luggage compartment door cover with the 13 clips.