Home › BODY › ENGINE HOOD / DOOR › HOOD SUPPORT ROD

HOOD SUPPORT ROD > DISPOSAL

for Preparation Click here



1. DISPOSE OF HOOD SUPPORT ASSEMBLY


    B127037E01
  1. Secure the hood support horizontally in a vise with the piston-rod pulled out.

  1. Wear safety glasses. Use a metal saw to slowly cut a groove between A and B shown in the illustration to release the gas.

    NOTICE:
    Although the gas inside the hood support is colorless, odorless, and harmless, metal debris may scatter. Therefore, cover the hood support with a piece of cloth or other material.