C1225/25
| When any of the following is detected:
- While outputting switching solenoid (SM1 or SM2) ON,
overcurrent continues for 0.05 seconds or more.
- While outputting switching solenoid (SM1 or SM2) OFF, an
open circuit continues for 0.05 seconds or more.
- While outputting switching solenoid (SM1 or SM2) ON,
an open circuit continues for 0.1 second or more.
- While outputting switching solenoid (SM1 or SM2) OFF,
current continues to be applied for 0.1 second or more.
- Short to GND in the switching solenoid (SM1 or SM2)
continues for 0.1 second or more.
- Switching solenoids SM1 and SM2 are shorted for 0.1 second or more.
| - Brake actuator assembly
- SM1 or SM2 circuit
|