Home › STEERING › STEERING COLUMN › STEERING LOCK SYSTEM

STEERING LOCK SYSTEM > PRECAUTION

for Preparation Click here



1.PRECAUTIONS WHEN WORKING ON STEERING LOCK SYSTEM
  1. After replacing the steering lock ECU (steering lock actuator assembly), perform the key ID code registration.

  2. After replacing the steering lock ECU (steering lock actuator assembly), confirm the lock/unlock operation of the steering lock.

    Operation Confirmation 
    Steering Lock Condition
    Operation Condition
    Lock
    With the engine switch off, open and close any door.
    Unlock
    Turn the engine switch from off to on (IG) or on (ACC).