STEERING LOCK SYSTEM > DTC CHECK / CLEAR |
| CHECK FOR DTCS |
Turn the engine switch off.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Check for DTCs. Enter the following menus: Body / Entry & Start / DTC.
Confirm the details of the DTCs (Click here).
| CLEAR DTCS |
Turn the engine switch off.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Clear the DTCs. Enter the following menus: Body / Entry & Start / DTC.
According to the display on the intelligent tester, select the trouble code data display with the clear button.