POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on 4 Windows) > DTC CHECK / CLEAR |
| CHECK DTC |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / (desired system) / Trouble Codes.
Check the details of the DTC(s) (Click here).
| CLEAR DTC |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / (desired system) / Trouble Codes.
Clear the DTCs.