Home › ENGINE ยท 2AZ-FE › COOLING › COOLING FAN MOTOR

COOLING FAN MOTOR > ON-VEHICLE INSPECTION

for Preparation Click here



1. COOLING FAN MOTOR


    A103699E02
  1. Check that the motor turns smoothly when the battery is connected to the fan motor connector.

  1. Measure the current while the motor is turning.

    Standard current:
    With trailer hitch:
    11.8 to 14.8 A at 20°C (68°F)
    Without trailer hitch:
    7.9 to 10.9 A at 20°C (68°F)

    If the result is not as specified, replace the cooling fan motor.



2. NO. 2 COOLING FAN MOTOR


    A103699E02
  1. Check that the motor turns smoothly when the battery is connected to the fan motor connector.

  1. Measure the current while the motor is turning.

    Standard current:
    With trailer hitch:
    7.9 to 10.9 A at 20°C (68°F)
    Without trailer hitch:
    7.9 to 10.9 A at 20°C (68°F)

    If the result is not as specified, replace the cooling fan motor No. 2.