SHIFT SOLENOID VALVE > INSTALLATION |
| 1. INSTALL TRANSMISSION VALVE BODY ASSEMBLY |
![]() |
Install the spring and check ball body.
![]() |
Align the groove of the manual valve with the pin of the lever.
Install the valve body with the 17 bolts.
| 2. INSTALL VALVE BODY OIL STRAINER ASSEMBLY |
![]() |
Coat a new O-ring with ATF WS.
Install the O-ring to the oil strainer.
![]() |
Install the oil strainer with the 3 bolts.
| 3. INSTALL TRANSMISSION WIRE |
![]() |
Coat the O-ring with ATF WS.
Install the ATF temperature sensor with the lock plate and bolt.
Connect the 7 shift solenoid valve connectors.
| 4. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY |
![]() |
Install the 2 magnets in the oil pan.
Apply adhesive or equivalent to 18 bolts.
![]() |
Using a new gasket, install the oil pan to the transaxle case with the 18 bolts.
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 6. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY |