Home › TRANSMISSION ยท U250E AUTOMATIC TRANSAXLE › SHIFT LEVER

SHIFT LEVER > DISASSEMBLY

for Preparation Click here



1. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY


    G028933E01
  1. Using a screwdriver, release the stopper.

  1. Using a screwdriver, disengage the locking lug of terminals (4) and (8), and pull the terminals out from the rear of the connector.



    C135019E01
  1. Release the indicator light wire from the clamp on the shift lock control unit.

  1. Turn the indicator light guide counterclockwise.

  1. Align the indicator light guide key with the groove on the shift lock control unit to remove the indicator light wire.



2. REMOVE SHIFT LOCK CONTROL ECU


    C135730
  1. Remove the shift lock control ECU from the shift lock control unit.