TRANSMISSION CONTROL CABLE ASSEMBLY > REMOVAL |
| 1. REMOVE AIR CONDITIONING UNIT |
| 2. REMOVE BATTERY |
![]() |
Loosen the bolt and nut, and remove the battery clamp.
Remove the battery and battery tray.
| 3. REMOVE AIR CLEANER INLET ASSEMBLY |
![]() |
Remove the 2 bolts, clamp and air cleaner inlet.
| 4. REMOVE AIR CLEANER CAP SUB-ASSEMBLY |
![]() |
Disconnect the mass air flow meter connector (*1).
Disconnect the purge VSV connector (*2).
Disconnect the 2 purge VSV vacuum hoses (*3).
Disconnect the purge line hose from the clamp (*4).
![]() |
Disconnect the No. 2 ventilation hose from the air cleaner hose.
![]() |
Lock the No. 1 air cleaner hose clamp, and then disconnect the No. 1 air cleaner hose from the throttle body.
![]() |
Remove the 2 bolts and air cleaner cap.
Remove the air cleaner filter element from the air cleaner case.
| 5. REMOVE AIR CLEANER CASE SUB-ASSEMBLY |
![]() |
Disconnect the hose clamp.
Remove the 3 bolts and air cleaner case.
| 6. DISCONNECT NO. 2 SHIFT CABLE GROMMET RETAINER |
![]() |
Disconnect the transmission control cable assembly from the transmission floor shift assembly while pushing the 2 claws of the floor shift cable.
Turn back the carpet.
![]() |
Remove the 2 bolts and disconnect the No. 2 shift cable grommet retainer.
Remove the No. 2 shift cable grommet retainer.
| 7. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY |
![]() |
Remove the nut from the control shaft lever.
Disconnect the transmission control cable assembly from the control shaft lever.
![]() |
Remove the clip and disconnect the transmission control cable assembly from the No. 1 control cable bracket.
![]() |
Disconnect the transmission control cable assembly from the control cable clamp.
Pull out the transmission control cable assembly from the body.