Home › TRANSMISSION ยท U660E AUTOMATIC TRANSAXLE › TRANSMISSION CONTROL CABLE ASSEMBLY

TRANSMISSION CONTROL CABLE ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE AIR CONDITIONING UNIT

HINT:
(Click here)



2. REMOVE CENTER AIRBAG SENSOR ASSEMBLY
  1. Turn back the carpet.



    C133884
  1. Disconnect the holder (with connectors).

  1. Remove the 3 bolts and center airbag sensor assembly.



3. REMOVE COOL AIR INTAKE DUCT SEAL


    A132967
  1. Remove the 7 clips and intake duct seal.



4. REMOVE AIR CLEANER INLET ASSEMBLY


    A132969
  1. Remove the 2 bolts, clamp and air cleaner inlet.



5. REMOVE AIR CLEANER CAP SUB-ASSEMBLY


    A135704
  1. Disconnect the 3 vacuum hoses.



    A135705E01
  1. Disconnect the mass air flow meter connector (*1).

  1. Disconnect the No. 2 ventilation hose (*2).

  1. Disconnect the hose band (*3).



    A135706
  1. Disconnect the 3 bands, and remove the air cleaner cap sub-assembly.



6. REMOVE AIR CLEANER CASE SUB-ASSEMBLY


    A132971
  1. Disconnect the vacuum hose and hose clamp.

  1. Remove the 3 bolts and air cleaner case.



7. REMOVE NO. 1 AIR CLEANER INLET


    A132970
  1. Remove the bolt and No. 1 air cleaner inlet.



8. DISCONNECT NO. 2 SHIFT CABLE GROMMET RETAINER


    C132234
  1. Turn back the carpet.

  1. Remove the 2 bolts and disconnect the No. 2 shift cable grommet retainer.

  1. Remove the No. 2 shift cable grommet retainer.



9. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY


    C135015
  1. Disconnect the end of the transmission control cable assembly from the shift lock control unit.

  1. Disconnect the transmission control cable assembly from the transmission floor shift assembly while pushing the 2 claws of the floor shift cable.



    C132236
  1. Remove the nut and transmission control cable from the control shaft lever.



    C132237
  1. Remove the clip and disconnect the transmission control cable assembly from the No. 1 control cable bracket.

  1. Pull out the transmission control cable assembly from the body.