CLUTCH UNIT > DISASSEMBLY |
| 1. REMOVE MANUAL TRANSAXLE ASSEMBLY |
| 2. REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY |
![]() |
Remove the clutch release fork with the clutch release bearing from the transaxle assembly.
| 3. REMOVE CLUTCH RELEASE BEARING ASSEMBLY |
Remove the release bearing hub clip and clutch release bearing assembly from the clutch release fork.
| 4. REMOVE RELEASE FORK SUPPORT |
![]() |
Remove the release fork support from the manual transaxle assembly.
| 5. REMOVE CLUTCH RELEASE FORK BOOT |
| 6. REMOVE CLUTCH COVER ASSEMBLY |
![]() |
Put matchmarks on the clutch cover assembly and flywheel sub-assembly.
Loosen the 6 bolts one turn at a time until spring tension is released.
Remove the 6 bolts and pull off the clutch cover assembly.
| 7. REMOVE CLUTCH DISC ASSEMBLY |