Home › TRANSMISSION ยท E351 MANUAL TRANSAXLE › DIFFERENTIAL OIL SEAL

DIFFERENTIAL OIL SEAL > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedures for the RH side (transaxle case oil seal) and LH side (transaxle case cover oil seal).
  2. The procedures listed below are for the LH side (transaxle case cover oil seal).



1. DRAIN MANUAL TRANSAXLE OIL
  1. Remove the filler plug and the gasket.

  1. Remove the drain plug and gasket, and drain the manual transaxle oil.

  1. Install a new gasket and the drain plug.

    Torque:
    49 N*m{ 500 kgf*cm , 36 ft.*lbf }



2. REMOVE FRONT WHEELS


3. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH
Click here.


4. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH

HINT:
Use the same procedures described for the LH side.



5. REMOVE FRONT TRANSAXLE CASE COVER OIL SEAL


    D026285E01
  1. Using SST, remove the oil seal.

    SST
    09308-00010  



6. REMOVE TRANSAXLE CASE OIL SEAL


    D025305E01
  1. Using SST, remove the oil seal.

    SST
    09308-00010