FLOOR SHIFT LEVER ASSEMBLY > INSTALLATION |
| 1. INSTALL FLOOR SHIFT LEVER ASSEMBLY |
![]() |
Install the shift lever assembly with the 4 bolts.
| 2. INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY |
![]() |
Connect the control cable to the shift lever retainer.
![]() |
Connect the end of the shift cable to the shift lever assembly with the clip.
Connect the end of the select cable to the shift lever assembly with a new clip.
| 3. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY |
![]() |
Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.
| 4. INSTALL UPPER CONSOLE PANEL |
![]() |
Engage the 2 claws and the 5 clips to install the upper console panel as shown in the illustration.
| 5. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
![]() |
Engage the 2 clips and install the No. 2 instrument cluster finish panel garnish.
| 6. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
![]() |
Engage the 2 clips and install the No. 1 instrument cluster finish panel garnish.
| 7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Install the shift lever knob sub-assembly.