Home › CRUISE CONTROL SYSTEM › CRUISE CONTROL › CRUISE CONTROL SYSTEM

DTC    P0500    Vehicle Speed Sensor Malfunction

DTC    P0503    Vehicle Speed Sensor "A" Intermittent / Erratic / High

for Preparation Click here


DESCRIPTION

Refer to DTC P0500 for 2AZ-FE .
Refer to DTC P0500 for 2GR-FE .

DTC No.
DTC Detection Condition
Trouble Area
P0500
The vehicle speed signal from the vehicle speed sensor is cut for 0.14 sec. or more while cruise control is in operation.
  1. Vehicle speed sensor
  2. Vehicle speed sensor circuit
  3. ECM
P0503
Momentary interruption and noise are detected when a rapid change of vehicle speed occurs while cruise control is in operation.
  1. Vehicle speed sensor
  2. Vehicle speed sensor circuit
  3. ECM

WIRING DIAGRAM

Refer to DTC P0500 for 2AZ-FE .
Refer to DTC P0500 for 2GR-FE .

INSPECTION PROCEDURE

Refer to DTC P0500 for 2AZ-FE .
Refer to DTC P0500 for 2GR-FE .