Home › CRUISE CONTROL SYSTEM › CRUISE CONTROL › CRUISE CONTROL SYSTEM

DTC    P0575    Cruise Control Input Circuit

DTC    P0607    Control Module Performance

for Preparation Click here


DESCRIPTION

This DTC indicates the internal abnormalities of the ECM.

DTC No.
DTC Detection Condition
Trouble Area
P0575
P0607
When both of the following conditions are met:
  1. STP signals input to the ECM supervisory CPU and control ECU are different for 0.15 sec. or more
  2. 0.4 sec. have passed after cruise cancel input signal (STP input) is input to the ECM
ECM

HINT:
The ECM receives signals from each sensor to control all functions of the cruise control system. When a trouble code is detected, the fail-safe function remains on until the ignition switch is turned off.


INSPECTION PROCEDURE



1.REPLACE ECM
    1. Replace the ECM (Click here for 2AZ-FE).
    2. Replace the ECM (Click here for 2GR-FE).

NEXT

END