FRONT SEAT OUTER BELT ASSEMBLY > DISPOSAL |
| 1. DISPOSE OF FRONT SEAT OUTER BELT ASSEMBLY (WHEN INSTALLED IN VEHICLE) |
![]() |
Check the function of SST.
![]() |
Connect the red clip of the SST to the battery positive (+) terminal, and the black clip to the battery negative (-) terminal.
![]() |
Press the SST deployment switch, and check that the LED of the SST deployment switch lights up.
![]() |
Connect SST.
Connect 2 SST, and then connect them to the front seat outer belt pretensioner.
![]() |
Move the SST at least 10 m (33 ft) away from the front of the vehicle.
Close all the doors and windows of the vehicle.
Deploy the front seat outer belt pretensioner.
Confirm that no one is inside the vehicle or within a 10 m (33 ft) radius of the vehicle.
Connect the red clip of the SST to the battery positive (+) terminal, and the black clip to the negative (-) terminal.
Press the SST deployment switch to deploy the front seat outer belt pretensioner.
![]() |
Dispose of the front seat outer belt assembly.
Remove the front seat outer belt assembly and SST.
Place the outer belt in a plastic bag, tie the end tightly, and dispose of it in the same way as other general parts.
| 2. DISPOSE OF FRONT SEAT OUTER BELT ASSEMBLY (WHEN NOT INSTALLED IN VEHICLE) |
![]() |
Check the function of SST.
![]() |
Connect the red clip of the SST to the battery positive (+) terminal, and the black clip to the battery negative (-) terminal.
![]() |
Press the SST deployment switch, and check that the LED of the SST deployment switch lights up.
![]() |
Connect SST.
Connect 2 SST, and then connect them to the front seat outer belt pretensioner.
![]() |
Place the outer belt on the ground and cover it with a tire and wheel assembly.
Position and hold the SST at least 10 m (33 ft) away from the wheel.
![]() |
Deploy the front seat outer belt pretensioner.
Check that no one is within a 10 m (33 ft) radius of the wheel.
Connect the red clip of the SST to the battery positive (+) terminal, and the black clip to the battery negative (-) terminal.
Press the SST deployment switch to deploy the front seat outer belt pretensioner.
![]() |
Dispose of the front seat outer belt assembly.
Remove the wheel and SST.
Place the outer belt in a plastic bag, tie the end tightly, and dispose of it in the same way as other general parts.