FRONT SHOCK ABSORBER > REASSEMBLY |
| 1. INSTALL FRONT SHOCK ABSORBER |
Install the front spring bumper to the piston rod.
![]() |
Install the front coil spring lower insulator onto the front shock absorber.
![]() |
Using SST, compress the front coil spring.
![]() |
Install the front coil spring to the front shock absorber.
![]() |
Install the front coil spring upper insulator as shown in the illustration.
![]() |
Install the front coil spring upper seat with the mark facing to the outside of the vehicle.
![]() |
Install a new front suspension support bearing as shown in the illustration.
![]() |
Install the front suspension support sub-assembly.
Temporarily tighten a new lock nut.
![]() |
Remove the SST slowly in order to release the coil spring.