REAR SHOCK ABSORBER > REMOVAL |
| 1. REMOVE REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type) |
![]() |
Detach the 2 front hooks of the seat cushion from the vehicle body.
Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.
Repeat the step above for the other hook.
Remove the seat cushion.
| 2. REMOVE REAR SEAT HEADREST ASSEMBLY (for Fold Down Seat Type) |
| 3. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY (for Fold Down Seat Type) |
| 4. REMOVE SEPARATE TYPE REAR SEAT BACK ASSEMBLY LH (for Fold Down Seat Type) |
![]() |
Remove the 2 bolts and separate type rear seatback assembly LH.
| 5. REMOVE SEPARATE TYPE REAR SEAT BACK ASSEMBLY RH (for Fold Down Seat Type) |
![]() |
Remove the 2 bolts and separate type rear seatback assembly RH.
| 6. REMOVE REAR SIDE SEAT BACK ASSEMBLY LH (for Fold Down Seat Type) |
![]() |
Remove the bolt and rear side seatback assembly LH.
| 7. REMOVE REAR SIDE SEAT BACK ASSEMBLY RH (for Fold Down Seat Type) |
| 8. REMOVE REAR SEAT CUSHION ASSEMBLY (for Reclining Seat Type) |
![]() |
Detach the 2 front hooks of the seat cushion from the vehicle body.
Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.
Repeat the step above for the other hook.
Remove the seat cushion.
| 9. REMOVE REAR SEAT HEADREST ASSEMBLY (for Reclining Seat Type) |
| 10. REMOVE REAR SEAT BACK COVER (for Reclining Seat Type) |
![]() |
Using a screwdriver, detach the claws and remove the 2 rear seatback covers.
| 11. REMOVE SEPARATE TYPE REAR SEAT BACK ASSEMBLY LH (for Reclining Seat Type) |
![]() |
Separate the 2 rear seat belts.
![]() |
Disengage the 3 clamps and then separate the cover.
![]() |
Remove the 2 bolts and 2 nuts and separate type rear seatback assembly LH.
| 12. REMOVE SEPARATE TYPE REAR SEAT BACK ASSEMBLY RH (for Reclining Seat Type) |
![]() |
Separate the rear seat belt.
![]() |
Disengage the 3 clamps and then separate the cover.
![]() |
Remove the 2 bolts and 2 nuts and separate type rear seatback assembly RH.
| 13. REMOVE REAR WHEEL |
| 14. SEPARATE REAR STABILIZER LINK ASSEMBLY LH |
![]() |
Remove the nut and separate the rear stabilizer link assembly from the front shock absorber LH.
| 15. SEPARATE REAR SPEED SENSOR |
![]() |
Remove the 2 bolts, and disconnect the rear brake flexible hose and rear speed sensor from the rear shock absorber with coil spring and rear axle carrier.
| 16. REMOVE REAR SUSPENSION SUPPORT NO. 1 COVER |
![]() |
Remove the 4 claws and the rear suspension support No. 1 cover.
| 17. REMOVE REAR SHOCK ABSORBER WITH COIL SPRING |
![]() |
Loosen the lock nut of the rear shock absorber with coil spring.
![]() |
Remove the 2 nuts and 2 bolts on the lower side of the rear shock absorber with coil spring.
![]() |
Remove the 3 nuts on the upper side of the rear shock absorber with coil spring.
Lower the rear axle carrier, and remove the 2 bolts on the lower side of the rear shock absorber with coil spring.