Home › SUSPENSION & AXLE › SUSPENSION › REAR STRUT ROD

REAR STRUT ROD > REMOVAL

for Preparation Click here



1. REMOVE REAR WHEEL


2. SEPARATE PARKING BRAKE NO. 3 CABLE ASSEMBLY


    C132474
  1. Remove the bolt, and separate the parking brake No. 3 cable assembly.



3. REMOVE REAR STRUT ROD


    C132459E01
  1. Support the rear axle carrier with a jack.



    C132476
  1. Remove the bolt and nut, and disconnect the strut rod (front side).

    NOTICE:
    When removing the bolt, keep the nut from rotating.



    C132476
  1. Remove the bolt, nut and strut rod from the rear axle carrier.

    NOTICE:
    When removing the bolt, keep the nut from rotating.