Home › SUSPENSION & AXLE › SUSPENSION › REAR STABILIZER BAR

REAR STABILIZER BAR > INSTALLATION

for Preparation Click here



1. INSTALL REAR STABILIZER BUSHING


    C132495E02
  1. Install the 2 rear stabilizer bushings to the outside of the stopper ring on the stabilizer bar.



2. INSTALL REAR STABILIZER BAR NO. 2 BRACKET
  1. Install the rear stabilizer bar No. 2 bracket.



3. INSTALL REAR STABILIZER BAR NO. 1 BRACKET
  1. Install the rear stabilizer bar No. 1 bracket.



4. INSTALL REAR STABILIZER BAR


    C132494E01
  1. Install the rear stabilizer bar with the 2 bolts. (LH Side)

    Torque:
    31 N*m{ 316 kgf*cm , 23 ft.*lbf }



    C138944E02
  1. Install the rear stabilizer bar with the 2 bolts. (RH Side)

    Torque:
    31 N*m{ 316 kgf*cm , 23 ft.*lbf }



5. INSTALL REAR STABILIZER LINK ASSEMBLY LH


    C132493
  1. Install the rear stabilizer link assembly LH with the 2 nuts.

    Torque:
    39 N*m{ 398 kgf*cm , 29 ft.*lbf }

    HINT:
    If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud.



6. INSTALL REAR STABILIZER LINK ASSEMBLY RH


    C138761
  1. Install the rear stabilizer link assembly RH with the 2 nuts.

    Torque:
    39 N*m{ 398 kgf*cm , 29 ft.*lbf }

    HINT:
    If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud.



7. INSTALL CENTER EXHAUST PIPE ASSEMBLY (for 2AZ-FE)
  1. Install a new gasket onto the front exhaust pipe.



  1. Install the center exhaust pipe assembly with the 2 bolts and 2 nuts.


    A135690E01

    Torque:
    43 N*m{ 438 kgf*cm , 32 ft.*lbf }



8. INSTALL CENTER EXHAUST PIPE ASSEMBLY (for 2GR-FE)
  1. Install a new gasket to the exhaust center pipe assembly.



  1. Install the exhaust center pipe to the exhaust front pipe with the 2 nuts and 2 bolts.


    A135719

    Torque:
    56 N*m{ 571 kgf*cm , 41 ft.*lbf }



9. INSTALL TAIL EXHAUST PIPE ASSEMBLY (for 2GR-FE)
  1. Install 2 new gaskets to the exhaust tail pipes.



  1. Install the 2 exhaust tail pipes with the 4 nuts.


    A135718

    Torque:
    43 N*m{ 438 kgf*cm , 32 ft.*lbf }



10. INSTALL REAR WHEELS

Torque:
103 N*m{ 1,050 kgf*cm , 76 ft.*lbf }



11. INSPECT EXHAUST GAS LEAK
If gas is leaking, tighten the areas necessary to stop the leak. Replace the damaged parts as necessary.