POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on Driver Door Window Only) > INITIALIZATION |
| INITIALIZE POWER WINDOW REGULATOR MOTOR FRONT LH (WITH JAM PROTECTION) |
Connect the negative battery terminal.
Turn the ignition switch ON. The indicator on the power window master switch will blink.
Fully close the door glass by operating the power window master switch. After the door glass stops, hold the power window master switch in the AUTO UP position for 1 second or more.
Check that the indicator on the power window master switch remains on.
| TO RETURN THE SYSTEM TO THE PRE-INITIALIZES CONDITION |