Home › BODY › MIRROR › OUTER MIRROR SWITCH

OUTER MIRROR SWITCH > INSPECTION

for Preparation Click here



1. INSPECT OUTER MIRROR SWITCH ASSEMBLY


    B148252
  1. Inspect the outer mirror switch.

    1. Measure the resistance according to the value(s) in the table below when the switch is operated.

      Standard resistance:
      Select "L" on the left/right adjustment switch:
      Tester Connection
      Switch Position
      Specified Condition
      4 - 8
      UP
      Below 1 Ω
      6 - 7
      4 - 7
      DOWN
      6 - 8
      5 - 8
      LEFT
      6 - 7
      5 - 7
      RIGHT
      6 - 8
      8 - 10
      Returns (Driving position)
      7 - 9
      8 - 9
      Retracts
      7 - 10
      Select "R" on the left/right adjustment switch:
      Tester Connection
      Switch Position
      Specified Condition
      3 - 8
      UP
      Below 1 Ω
      6 - 7
      3 - 7
      DOWN
      6 - 8
      2 - 8
      LEFT
      6 - 7
      2 - 7
      RIGHT
      6 - 8
      8 - 10
      Returns (Driving position)
      7 - 9
      8 - 9
      Retracts
      7 - 10