Home › BODY ELECTRICAL › DOOR LOCK › KEY REMINDER WARNING SYSTEM

KEY REMINDER WARNING SYSTEM > DATA LIST / ACTIVE TEST

for Preparation Click here



READ DATA LIST

HINT:
Using the intelligent tester to read the DATA LIST allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non intrusive inspection can be very useful as intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the DATA LIST information early in troubleshooting is one way to save diagnostic time.



    B139188E06
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to the ON position.

  3. Read the DATA LIST.

    BODY: 
    Tester Display
    Measurement Item/Range
    Normal Condition
    Diagnostic Note
    Key Unlock Warning SW
    Unlock warning switch signal/ON or OFF
    ON: Key is in ignition key cylinder
    OFF: No key is in ignition key cylinder
    -
    D Door Courtesy SW
    Driver's side door courtesy switch signal/ON or OFF
    ON: Driver's side door is open
    OFF: Driver's side door is closed
    -


PERFORM ACTIVE TEST

HINT:
Using the intelligent tester to perform ACTIVE TEST allows the operation or effects of actuators, relays, VSVs, and other items to be tested without removing any parts. This non intrusive inspection can be very useful as intermittent conditions or operation may be discovered before parts or wiring are disturbed. Using the ACTIVE TEST early in troubleshooting is one way to save diagnostic time. It is possible to view DATA LIST information on the intelligent tester while performing ACTIVE TEST.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to the ON position.

  3. Perform the ACTIVE TEST.

    METER: 
    Tester Display
    Test Part
    Control Range
    Diagnostic Note
    Key Remained Buzzer
    Key reminder buzzer
    OFF/ON
    Confirm that the vehicle is stopped with the engine idling