Home › BODY ELECTRICAL › OTHER SYSTEM › CLOCK

CLOCK > TERMINALS OF ECU

for Preparation Click here



CLOCK ASSEMBLY

E128062E01


Symbols (Terminal No.)
Wiring Color
Terminal Description
Condition
Specified Condition
B (F3-1) - Body ground
R - Body ground
Battery
Always
10 to 14 V
ACC (F3-2) - Body ground
L - Body ground
Ignition switch signal (Accessory)
Turn the ignition switch off
Below 1 V
Turn the ignition switch to the ON position
10 to 14 V
ILL+ (F3-4) - Body ground
O - Body ground
Illumination signal
Turn the ignition switch to the ON position, light control switch OFF
10 to 14 V
Turn the ignition switch to the ON position, cover the automatic light control sensor by hand, and light control switch TAIL/HEAD
Below 1 V
GND1 (F3-19) - Body ground
W-B - Body ground
Ground
Always
Below 1 V