CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY > INSTALLATION |
| 1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY |
![]() |
Apply a light coat of engine oil to an O-ring of the camshaft timing oil control valve assembly sensor.
![]() |
Install the camshaft timing oil control valve assembly sensor with the bolt.
Connect the camshaft timing oil control valve assembly sensor connector.
| 2. INSTALL CLIP NUT |
![]() |
Install the clip nut.
| 3. REMOVE VACUUM HOSE CLAMP |
![]() |
Install the vacuum hose clamp with the bolt.
| 4. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY |
![]() |
Install the engine cover with the 2 nuts.