Home › ENGINE ยท 2AZ-FE › ENGINE CONTROL SYSTEM › CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    A134904
  1. Remove the 2 nuts and cover.



2. REMOVE VACUUM HOSE CLAMP


    A135664
  1. Remove the bolt, and disconnect the vacuum hose clamp.



3. REMOVE CLIP NUT


    A135665
  1. Remove the clip nut.



4. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    A124556
  1. Disconnect the camshaft timing oil control valve assembly connector.

  1. Remove the bolt and camshaft timing oil control valve assembly.