Home › ENGINE ยท 2AZ-FE › EMISSION CONTROL › CANISTER

CANISTER > INSPECTION

for Preparation Click here



1. INSPECT CHARCOAL CANISTER ASSEMBLY
  1. Visually check the charcoal canister for cracks or damage.



    A142716E01
  1. Blow air into port A and check that the air flows from both port B and C.



    A142717E01
  1. Apply a vacuum to port A. Check that vacuum does not decrease when ports B and C are closed, and check that vacuum does not decrease when port B is released.
    If the result is not as specified, replace the charcoal canister assembly.