POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on Driver Door Window Only) > Front Passenger Side Power Window Switch Power Source Circuit |

| 1.CHECK WIRE HARNESS (POWER WINDOW REGULATOR SWITCH - BATTERY AND BODY GROUND) |
![]() |
Disconnect the H6 (I9) connector.
Measure the voltage according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 3 (B) - Body ground | Ignition switch ON | 10 to 14 V |
|
| ||||
| OK | ||
| ||