BRAKE ACTUATOR (w/o VSC) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE RADIATOR RESERVE TANK ASSEMBLY |
![]() |
Separate the radiator reserve tank hose.
![]() |
Remove the radiator reserve tank assembly.
| 3. DRAIN BRAKE FLUID |
| 4. REMOVE BRAKE ACTUATOR WITH BRAKE ACTUATOR BRACKET ASSEMBLY |
![]() |
Release the lock lever and disconnect the brake actuator connector.
![]() |
Using SST, disconnect the 6 brake lines from the brake actuator with brake actuator bracket assembly.
![]() |
Use tags or make a memo to identify the places to reconnect.
![]() |
Remove the 3 bolts and brake actuator with brake actuator bracket assembly from the body.