Home › BRAKE › BRAKE CONTROL › BRAKE ACTUATOR (w/o VSC)

BRAKE ACTUATOR (w/o VSC) > REASSEMBLY

for Preparation Click here



1. INSTALL BRAKE ACTUATOR


    C132779E01
  1. Install the brake actuator to the brake actuator bracket assembly with the 2 nuts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

    NOTICE:
    Do not remove the hole plug before installing a new brake actuator because the brake actuator is filled with brake fluid.