SEAT BELT WARNING SYSTEM > TERMINALS OF ECU |
| CLOCK ASSEMBLY |

| Terminal No. (Symbols) | Terminal Description | Condition | Specified Condition |
| F3-3 (IG) - Body ground | Power supply | Ignition switch OFF → ON | Below 1 V → 10 to 14 V |
| Terminal No. (Symbols) | Terminal Description | Condition | Specified Condition |
| F3-10 (PBEW) - Body ground | Passenger seat belt signal | The passenger seat is occupied, seat belt is fastened → unfastened | Below 1 Ω → 10 kΩ or higher |
| F3-19 (GND1) - Body ground | Ground | Always | Below 1 Ω |