Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM

NAVIGATION SYSTEM > The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK CELLULAR PHONE
  1. Check if the voice on the other side can be heard using a cellular phone.

    OK:
    Voice can be heard.



NG
REPAIR OR REPLACE CELLULAR PHONE
OK


2.CHECK NAVIGATION SYSTEM
  1. Check that navigation sound can be heard from the front speaker.

    OK:
    Navigation sound can be heard.



NG
GO TO "VOICE GUIDANCE DOES NOT FUNCTION" IN PROBLEM SYMPTOMS TABLE (Click here)
OK


3.CHECK SETTINGS


    E181038
  1. Check if the volume level is set to low on the "Call" screen.

    OK:
    The level is not set low.



NG
SET VOLUME TO HIGH
OK


4.CHECK SETTINGS (OPERATION CHECK)


    E176560
  1. Display the "Hands-free Volume Setting" screen (Click here).

  1. Check if the receive voice level is set to "0".

    HINT:
    The receive voice level can be set to 11 different levels, -5 to +5, with a 3 dB difference.

  1. Check if the receive voice level is set to the minimum or maximum level.

    HINT:
    When the receive voice level is set to the minimum or maximum level, the sound may be distorted.

    OK:
    The receive voice level is set to "0".



NG
SET RECEIVE VOICE LEVEL TO "0"
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)