Home › BODY ELECTRICAL › METER › ENGINE OIL PRESSURE SWITCH

ENGINE OIL PRESSURE SWITCH > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY
  1. Disconnect the connector from the engine oil pressure switch assembly.

  1. With the switch still installed, measure the resistance between the terminal of the engine oil pressure switch and engine ground.

    Standard resistance:
    Engine stopped:
    Below 1 Ω
    Engine idling:
    10 kΩ or higher

    HINT:
    If the value is not as specified, replace the engine oil pressure switch assembly.