Home › ENGINE · 2AZ-FE › ENGINE CONTROL SYSTEM › AIR FUEL RATIO SENSOR RELAY

AIR FUEL RATIO SENSOR RELAY > INSPECTION

for Preparation Click here



1. INSPECT AIR FUEL RATIO SENSOR RELAY


    A137364E03
  1. Using an ohmmeter, measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester connection
    Specified Condition
    1E-7 - 1E-10
    Below 1 Ω
    1A-3 - 1A-4
    10 kΩ or higher
    1A-3 - 1A-4
    Below 1 Ω (Battery voltage applied between terminals 1E-7 and 1E-10)