Home › TRANSMISSION ยท U660E AUTOMATIC TRANSAXLE › SHIFT LEVER

SHIFT LEVER > REASSEMBLY

for Preparation Click here



1. INSTALL SHIFT LOCK CONTROL ECU


    C135730
  1. Install the shift lock control ECU to the shift lever.



2. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY


    C135019E02
  1. Insert the indicator light wire into the shift lock control unit while aligning the groove on the unit with the indicator light guide key.

  1. Install the indicator light guide by turning it clockwise until it securely locks.

  1. Install the indicator light wire to the clamp on the shift lock control unit.



    G028933E01
  1. Connect terminals (4) and (8) of the indicator light wire.

  1. Push the stopper.