ATF TEMPERATURE SENSOR > INSTALLATION |
| 1. INSTALL ATF TEMPERATURE SENSOR ASSEMBLY |
![]() |
Coat a new O-ring with ATF and install it to the ATF temperature sensor assembly.
Coat the 4 bolts with ATF.
![]() |
Install the ATF temperature sensor assembly and clamp to the valve body with the 4 bolts.
Connect the connector.
| 2. INSTALL VALVE BODY OIL STRAINER ASSEMBLY |
![]() |
Coat a new O-ring with ATF and install it to the oil strainer.
![]() |
Install the oil strainer to the valve body with the 2 bolts.
| 3. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY |
![]() |
Install the 2 magnets to the oil pan.
Install a new gasket to the oil pan.
Apply adhesive or equivalent to the 18 bolts.
![]() |
Install the oil pan from the automatic transaxle with the 18 bolts.
| 4. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY |