Home › BODY ELECTRICAL › LIGHTING › FRONT DOOR COURTESY SWITCH

FRONT DOOR COURTESY SWITCH > INSPECTION

for Preparation Click here



1. INSPECT FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY


    E071371E02
  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Switch Operation
    Specified Condition
    1 - Switch body
    Not pushed (ON)
    Below 1 Ω
    Pushed (OFF)
    10 kΩ or higher

    If the result is not as specified, replace the front door courtesy light switch assembly.