Home › ENGINE ยท 2AZ-FE › ENGINE CONTROL SYSTEM › ACCELERATOR PEDAL ROD

ACCELERATOR PEDAL ROD > INSTALLATION

for Preparation Click here



1. INSTALL ACCELERATOR PEDAL ROD

NOTICE:
  1. Avoid physical shock to the accelerator pedal assembly.
  2. Do not disassemble the accelerator pedal assembly.



    A135676
  1. Install the accelerator pedal rod with the 2 bolts.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. Connect the accelerator pedal position sensor connector.