Using a dial indicator, measure the forward clutch pack clearance while applying and releasing compressed air (392 kPa, 4.0 kgf/cm2, 57 psi).
- Pack clearance:
- 1.00 to 1.25 mm (0.0394 to 0.04921 in.)
If the clearance is not within the standard, inspect the discs, plates and flange.
If the piston stroke is less than the minimum, parts may have been assembled incorrectly. Check and reassemble again.
- HINT:
- As the opening is large, cover it with a piece of cloth or shop rag to prevent the compressed air from being released.
- There are 5 different thicknesses of flanges available.
Flange thickness: mm (in.)
No.
| Thickness
| No.
| Thickness
|
1
| 3.00 (0.1181)
| 4
| 3.45 (0.1358)
|
2
| 3.15 (0.1240)
| 5
| 3.60 (0.1417)
|
3
| 3.30 (0.1299)
| -
| -
|